Expansion racks (for mounting t2 1/0 modules), Expansion units, Bu152 – Toshiba T1S User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Expansion Racks (for mounting T2 1/0 modules)

A 2 or 4 slot expansion rack can be connected to the T1-40/T1-40S. By connecting the expansion rack.

T2 series I/O modules can be used with the T1-40/T1-40S. Interna] 5 Vdc power is supplied irom the

T1-40/T1-40S.

Type

Description

BU152

Z modules, with 0.15 m cable

BU154

4 modules, with 0.15 m саЫа

Available T2 series I/O modules:

Type

Marne

Specifications

DI31

DC input

16 points, 12—24 VdCi'ac input, 3 mA

□132

32 poirte, 24 Vdc input, 5 mA (connector type)

□1235

64 points, 24 Vdc input, 4 mA (connector type)

IN51

AC mput

16 points. 100—120 Vac input, 7 mA

IN61

16 points, 200—^240 Vac input, 6 mA

R061

Relay output

12 points. 240 Vac/24 Vdc output, 2 A/poInt (max.)

R062

8 points (isolated), 240 Vac/24 Vdc output, 2 A/point (max.)

D031

Transistor output

16 points, S—24 Vdc output (current sink). 1 A/point (max.)

D032

D0235

DO^P

32 points. 5—24 Vdc output (current sink). 0,1 A/ptxnl (max.)
64 points, 5—24 Vdc output (Current sink), 0.1 A/poInt (max.)

16 points, 24 Vdc output (current scurce), 1 A/point (max.)

A061

Triac output

12 pointe, 100—240 Vac output, 0.5 A/point (max.)

AI21
AI31

Analog Input

4 channels, 4 to 20 mA/1 to 5 V input, 8-bit resolution
4 channels, 0 to 10 V input. 8-bit resolution

AI22

4 chatnels, 4 to 20 mA/1 to 5 V input, 12-bit resolution

AI32

4 chann^s, -10 to 10 V input, 12-bit resolution

A031

Analog output

2 channels, 4 to 20 mA/1 to 5 V/D to 10 V output, 8:bil resolution

A022

2 channels, 4 to 20 mA/1 to 5 V output, 12-bit resolution

À032

2 channels. -10 to 10 V output, 12-blt resolution

PI21

Pul^ Input

1 channel plus input, 5/12 V, 100 kpps (max.)

MC11

Position control

C^11 Com municalion l/F 1 port of RS-252C, free ASCII torrhat, 300 to 19200 bps, 32Q bytes (max.)

Expansion Units

A 32 point expansion unit can be connected to the Tl -40/T1-40S. A 0,5 tn cable is included with the

expansion unit. Internal 5 Vdc power Is supplied from the T1-40/T1-40S, 24 Vdc power for the output

relay coils is required from an external source (such as tfie controller).

Type

Description

T1-EDR32

16 points. 24 Vdc Input, 7 mA
16 points, relay output, 2 A/point (max.)

T1-EAR32

16 points, 100—120 Vac input, 7 mA
16 points, relay output, 2 A/point (max.)

11

Advertising
This manual is related to the following products:

T1