Kandy programmer (hp911a), Program storage module (rm102), Multi-drop adapter (cu111) – Toshiba T1S User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Kandy Programmer (HP911A)
Net«:
SameTl & r jtictlons are limited wild usmg ttie HPiii lA,
Tile HP911A is a hard-held graphic programmer. Its
portability makes it ideal for maintenance use at remote
locations. The HP911A has all the features of a full size
programming terminaJ. (2 m cable for T1 is included)
• Ladder logic programming of T-Series programmable
controllers T1/T1S, T2/T2E/T2N and T3.
• Suilt-in EEPROM allows program copy between
T-Series controllers.
• Two display modes,
- Normal: S lines and 12 columns
- Zoom: Full device description
• Data monitor for I/O and internal registers.
• On-line programming & EEPROM write. (T1S)
• On-line data set & I/O force.
• Backlit LCD display for better operation In dim light.
Program Storage Module (RM102)
The RM102 is an external memory device, which can
store a T1/T1S program. By using the RM102, program
transfer from a master T1/T1S can be easily done without
the need for a computer or hand held programmer. Two-
button operation makes program loading/saving
accessible to anyone. However, if a password is used in
the T1/riS, the password in the RM102 must match
before a program load is executed.
Multi-drop Adapter (CU111)
The GU111 is an RS-232C/RS-485 converter dedicated
to then Series, By using theCUm, up to 32 T1/T1Ss
can be connected to a master computw or higher level
controller via an RS-485 link, The master computer can
run a SCADA, MM! or DDE Server program. The T-PDS
programming software can also be used through the RS-
485 link to program or monitor each individual T1/T1S,
(T1 version 1.20 or later is required for connecting the
T-PDS programming software)
13