RCA RV-9978 - Manual (Page 12)

CONISIECTIIMG AUXILIARY COMPONENTS
CONNECTING A SATELLITE RECEIVER
Using a paired (red/white) stereo cable, a single
(yellow) video cable and two coaxial cables, connect
your new audio receiver to your satellite receiver as
shown to the right.
To watch TV programs in stereo after connection,
press TV and tune to the desired channel. To watch
satellite programming, press SAT*CABLE and tune to
the desired channel.
NOTE: Do not stack electronic components or other
objects on top of the satellite receiver. The slots on
top of the receiver must be left uncovered to allow
proper airflow to the unit. Blocking the airflow to the
unit could impair performance or damage your
receiver and other components. Also, do not stack the
satellite receiver on top of a "hot component," such as
an audio power amplifier.
O
-W
/\ ____________ 0
O O 0
s-s
___ _
_
____
Q Q Q Q Q 0 D Q Q 0 a 0
SATELUTE DISH
CONNECTING COMPLIMENTARY
COMPONENTS
You can connect a laserdisc player, second VCR or
camcorder/video recorder to the VIDEO connection.
Using a paired (red/white) stereo cable and two single
(yellow) video cables, connect your new audio receiver
to the complimentary component as shown to the
right.
To play laserdiscs or videos, press the LD*VCR2 and
then play.
NOTES: When using this connection for a second VCR,
the recording option is not available.
If your camcorder or video camera does not have an
RCA-type terminal for audio/video, you can purchase
an adapter from an RCA dealer or electronic parts
store.
If the video connection is being used when you try to
hook up your video recorder or camcorder, connect
the component through any other available video
output.
12