RCA RV-9978 - Manual (Page 13)

CONNECTING AUXILIARY COMPONENTS
CONNECTING A COMPACT DISC
PLAYER
Using one paired (red/white) stereo cable, connect
your new receiver to your compact disc player as
shown to the right.
To play a CD, press CD, put the receiver in CD mode
and press PLAY.
NOTE; The AUDIO SOURCE connection can be used as
input for any stereo audio signal.
CONNECTING A PASSIVE SUBWOOFER
Should you choose to use a passive subwoofer, the
hook up is slightly different from that of a powered
one.
If necessary, remove the vinyl covering from the ends
of the wires and twist the wire. Press down and hold
the tab on the back of the speaker. Insert the wire in
the hole, matching (+) to {+) and (-) to (-)■ Release the
tab and pull the wire gently to make sure it is securely
connected
CONNECTING A TAPE DECK
Using two paired (red/white) stereo cables, connect
your new receiver to your tape deck as shown in the
diagram to the right.
To play a tape, press TAPE and then PLAY To record a
tape, turn on the audio source you want to record
from and then press RECORD on the tape player.
A/V Receiver
or Television
Speaker
[caiioil
Subwoofer
13