Chrysler 2009 Sebring Sedan - Owner Manual - Manual (Page 418)

2. Remove the two plastic wing nuts from the taillight
housing.
3. Grasp the taillight housing and pull it firmly outward
while pushing gently on the studs from inside to disen-
gage the housing from the vehicle.
4. Rotate the applicable bulb’s electrical connector one-
quarter turn counterclockwise and remove it from the
taillight housing.
5. Remove the bulb from the connector socket and install
the replacement bulb.
1 — Tail/Stop Light 2 — Turn Signal Light
416 MAINTAINING YOUR VEHICLE