Chrysler 2009 Sebring Sedan - Owner Manual User Manual
Page 419
Advertising
6. Install the bulb and connector assembly into the
taillight housing and rotate the connector one-quarter
turn clockwise to lock it in place.
7. Reinstall the taillight housing.
Changing the Backup Light
1. Open the trunk.
2. Rotate the bulb’s electrical connector one-quarter turn
counterclockwise and remove it from the housing.
3. Remove the bulb from the connector socket and install
the replacement bulb.
4. Install the bulb and connector assembly into the
housing and rotate the connector one-quarter turn clock-
wise to lock it in place.
1 — Rear Fog Light
2 — Backup Light
MAINTAINING YOUR VEHICLE
417
7
Advertising
This manual is related to the following products: