Chrysler 2011 300 - Manual (Page 145)

Front Heated Seat Operation — Vehicles Equipped
With Uconnect™ Touch 4.3:
Press the CLIMATE hard-key to enter the climate control
screen.
Press the “Driver” or “Pass” seat soft-key once
to select HI-level heating. Press the soft-key a
second time to select LO-level heating. Press
the soft-key a third time to shut the heating
elements OFF.
Front Heated Seat Operations — Vehicles
Equipped With Uconnect™ Touch 8.4 and 8.4 Nav:
Press the “Controls” soft-key located on the bottom of the
Uconnect™ Touch display.
Press the “Driver” or “Passenger” seat soft-key
once to select HI-level heating. Press the soft-
key a second time to select LO-level heating.
Press the soft-key a third time to shut the
heating elements OFF.
NOTE: Once a heat setting is selected, heat will be felt
within two to five minutes.
When the HI-level setting is selected, the heater will
provide a boosted heat level during the first four minutes
of operation. Then, the heat output will drop to the
normal HI-level. If the HI-level setting is selected, the
system will automatically switch to LO-level after a
maximum of 60 minutes of continuous operation. At that
time, the display will change from HI to LO, indicating
the change. The LO-level setting will turn OFF automati-
cally after a maximum of 45 minutes.
Vehicle Equipped With Remote Start
On models that are equipped with remote start, the
driver’s heated seat can be programmed to come on
during a remote start. Refer to “Remote Starting System
— If Equipped” in “Things To Know Before Starting Your
Vehicle” for further information.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143