Chrysler 2011 300 User Manual

Page 174

Advertising
background image

The switch is located on the front side of the driver’s seat
cushion side shield.

Press the switch forward to move the pedals forward
(toward the front of the vehicle).

Press the switch rearward to move the pedals rearward
(toward the driver).

• The pedals can be adjusted with the ignition OFF.
• The pedals can be adjusted while driving.
• The pedals cannot be adjusted when the vehicle is in

REVERSE or when the Electronic Speed Control Sys-
tem is on. The following messages will be displayed
on vehicles equipped with the Electronic Vehicle In-
formation System (EVIC) if the pedals are attempted to
be adjusted when the system is locked out (“Adjust-
able Pedal Disabled — Cruise Control Engaged” or
“Adjustable Pedal Disabled — Vehicle In Reverse”.

NOTE:

For vehicles equipped with Driver Memory

Seat, you can use your Remote Keyless Entry (RKE)
transmitter or the memory switch on the driver’s door
trim panel to return the adjustable pedals to pre-
programmed positions. Refer to “Driver Memory Seat”
in “Understanding The Features Of Your Vehicle” for
further information.

Adjustable Pedals Switch

172

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising