Chrysler 2011 300 - Manual (Page 228)

Sunroof and Power Shade Movement – Manual
If any sunroof or shade switch is pressed and held for
more than one second, the sunroof or shade movement
will continue only as long as the switch is continuously
held. Whenever the switch is released, any sunroof or
shade movement will stop. This allows the sunroof or
shade to be stopped at any desired partially open
position.
Pinch Protect Feature
This feature will detect an obstruction in the opening of
the sunroof or the shade during any close operation. If an
obstruction is detected, the sunroof or shade will auto-
matically reverse direction to release the obstruction. If
this occurs, remove the obstruction and then press the
sunroof or shade switch forward to complete the desired
close motion.
Pinch Protect Override
Method 1:
If a known obstruction (ice, debris, etc)
prevents closing of the sunroof or shade, press the
corresponding switch forward and hold for two seconds
after the reversal motion ends. After two seconds, all
closing motions will be manual and will have Pinch
Protect disabled. This will allow the sunroof or shade to
move towards the closed position.
Method 2:
If three consecutive sunroof or shade close
attempts result in Pinch Protect reversals, the fourth close
attempt will be a Manual Close movement with Pinch
Protect disabled.
Pinch Protect Override Cancellation
Once the sunroof or shade reaches the closed position,
Pinch Protect will reactivate. In addition, if any other
switch is pressed which moves the sunroof or shade
away from the closed position, Pinch Protect will
reactivate.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE