CLEAR Modem with Wi-Fi User Guide - Manual (Page 5)

4
Set up the Modem
Place the Modem on a Flat, Stable Surface
Align the slots at the bottom of the Modem with the slots on the Modem Foot (Foot). Push gently on
the Modem to snap the Foot onto the Modem.
To remove the Foot, press both tabs outward at the same time and the Foot will release from the
slots.
Do not place the Modem on its side or block the top air vents. The preferred location is near a
window and away from obstructions.
Plug in the Power Cord
Follow the diagram below to plug in the Power Cord.
After you’ve plugged the Modem into a power outlet, the Modem will automatically search for a
CLEAR 4G signal.
Plug one end of the Power
Cord into the AC adapter
port on the Modem and plug
the other end into a power
outlet.