Onnect to the wi, Etwork, Lternative to wi – CLEAR Modem with Wi-Fi User Guide User Manual
Page 7: Set up the modem (continued)
6
Set up the Modem (continued)
Connect to the wi-fi Network
With your device’s wi-fi turned on, view the list of available wireless networks.
Connect to the Modem’s wi-fi network. The default wi-fi network name is ―
WiFiRSU-xx‖, where
―xx‖
are the last two digits of the MAC ID, which can be found on the label on the back of the
Modem. The MAC ID also might be referred to as WAN MAC ID.
Enter the default w-fi password. The default wi-fi password is comprised of the last eight digits of
the MAC ID, which can be found on the label on the back of the Modem. The MAC ID also might
be referred to as WAN MAC ID.
Your device should display a message indicating it has connected to your Modem’s wireless
network.
Alternative to wi-fi
As an alternative to wi-fi, you also can use the included Ethernet Cable to connect to the Modem.
Plug one end of the Ethernet Cable
into the ethernet port on the computer
and plug the other end into the
ethernet port on the Modem.