Remote control, Operation, Enter – Chamberlain WD962KEV User Manual

Page 40

Advertising
background image

39

Operation

Remote Control

Your remote control has been programmed at the factory to operate with your garage door opener.
Older Chamberlain remote controls are NOT compatible, see page 44 for compatible accessories.
Programming can be done through the door control or the learn button the garage door opener. To
program additional accessories refer to the instructions provided with the accessory or visit
www.chamberlain.com. If your vehicle is equipped with a Homelink

®

, you may require an external

adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional
information.

TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN
USING THE MOTION-DETECTING CONTROL PANEL

1. Press the LEARN button on the door control to enter Programming Mode.
2. Press the LEARN button again, the LED will flash once.
3. Remote Control:

Press the button on the remote control that you wish to operate your garage door.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry
keypad. Then press the ENTER button.

The garage door opener lights will flash (or two clicks will be heard) when the code has been
programmed. Repeat the steps for programming additional remote controls or keyless entry devices.

The command LED
will flash once.

The command LED will
flash once again.

1

2

OR

PIN

?

?

?

?

4

GHI

5

JKL

7

PRS

8

TUV

9

WXY

0

QZ

*

#

ENTER

0

QZ

*

#

ENTER

6

MNO

3

TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN
USING THE SMART CONTROL PANEL

1. Press the navigation button below "MENU" to view the Features menu.
2. Use the navigation buttons to scroll to "PROGRAM".
3. Select "REMOTE" or "KEYPAD" to program from the program menu.
4. Remote Control:

Press the button on the remote control that you wish to operate your garage door.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry
keypad. Then press the ENTER button.

The garage door opener lights will flash (or two clicks will be heard) when the code has been
programmed. Repeat the steps for programming additional remote controls or keyless entry devices. If
programming is unsuccessful, program the remote using the learn button.

Press

to continue.

TO REMOTE

Press

to continue.

1

2

3

OR

PIN

?

?

?

?

4

GHI

5

JKL

7

PRS

8

TUV

9

WXY

0

QZ

*

#

ENTER

0

QZ

*

#

ENTER

6

MNO

4

Advertising