Clippasafe 122 Pressure Fit Gate - Manual (Page 5)

Before using the gate ensure that it is fitted correctly and is secure.
Ensure the gate is in the open position by sliding the button (1) and
then lifting the latch (2), this will retract the screw adjuster on the gate.
To open the gate, lift it slightly. To close the gate, lift it slightly so that
the bottom sits back on the frame and push the handle down firmly.
Always check that the gate is closed and locked before leaving unattended.
Using the Gate E
Extensions F
Two extensions are available for this gate: a 7cm extension ‘F’ and a 14cm
extension ‘I’, these extensions can also be used together. With the 7cm
extension ‘F’ this gate is suitable for openings between 80cm and 87cm,
with the 14cm extension ‘I’ this gate is suitable for openings between
87cm and 94cm. With both the 7cm and the 14cm extensions ‘F’ & ‘I’,
this gate is suitable for openings between 94cm and 101cm.
x 1 F x 2 C
x 1 I x 2 H x 2 J x 1 K