Safety requirement – COMEUP Utility Duty Winch (Ver:00) User Manual

Page 5

Advertising
background image

I

.

Safety Requirement

Confirm that the winch complies with the using conditions.
Because the maximum rope tensile force capable of loading decreases corresponding to the
increase of number of winding layers, please carry out rope winding according to the instruction
of this manual.
Don’t use rope that is unsuitable because of its construction, strength or having any defects.
Don’t use a hook or pulley block that are suited to the rope.

Precautions at the time of operation of winch are listing as follows:

The operator of winch in some cases is required to hold qualifications according to applicable
laws and ordinances.
Prior to starting of use, carry out the daily checking without fail.
During use five wraps of rope must remain on the drum at all times.
Even in the condition where the rope is feed out at most,
Do not use winch as a lifting device or a hoist for vertical lift (fig1).
Do not use winch to move people.
Do not exceed maximum line pull ratings shown. Do not shock load.
Keep hands clear of wire rope.
Pull from an angle below 15 degree to straighten up the vehicle
or boat (fig 2).
Run the engine during winching operations to keep battery charged.
Use leather gloves or a heavy rag when handling the wire rope.
Disconnect the remote switch from the winch when not in use.
When winching a heavy load, lay a heavy blanket over the wire
rope near the hook end.
Always operate your winch in an underwound orientation only (Fig 3).

The winch is designed to give safe and dependable service of trouble-free operation. Please read
and understand this Instruction Manual before installing your winch.

3

Precautions before using of winch are listing as follows:

Advertising