COMEUP Utility Duty Winch (Ver:00) - Manual (Page 9)

7
Battery Leads Connection
1). Battery leads specification is listing as follows:
2). Use a 5/16˝ bolt, nut and washer to attach the black lead (negative -) firmly to the
base plate of the vehicle (fig 7).
3). Attach the red lead (positive +) tightly to the circuit breaker marked AUX, meanwhile,
connect copper plate to the other end of the circuit breaker, marked BAT (fig 8).
4). Connect the copper plate to the connector of battery (fig 8).
Switch Connection:
1). A hand-held remote switch w / 1.25mm 2 x 3C x 3m cord supplied
2). Open the rubber gland of the winch, then insert the switch plug into the socket of the
winch (fig 9).
Model DV-2500i DV-3500i DV-4500i
Control Type Solenoid/Indirect
12V 6 AWG × 5’ (1.5 m) 6 AWG × 5’(1.5 m) 6 AWG × 5’(1.5 m)
24V 8 AWG × 5’ (1.5 m) 8 AWG × 5’(1.5 m) 8 AWG × 5’(1.5 m)
Volt