COMEUP ATV/UTV Winch (Ver:04) - Manual (Page 8)

IV. Operation
6
Cable In and Out
Clutch Function
The clutch allows rapid pay-out of the wire rope/synthetic rope for hooking onto a load or
anchor points and is operated by a clutch shifter located on the end of the winch.
1). To engage the clutch, turn the clutch shifter counter-clockwise to the positioned point of
“Engaged”. The winch is now ready for pulling.
2). To disengage the clutch, turn the clutch shifter clockwise to the positioned point of
“Disengaged”. Wire rope/synthetic rope can now be free spooled off the drum.
1). To determine “Cable Out“, Press to the “Out” position
2). To determine “Cable In“, Press to the “In” position
3). To stop winching, release the rocker level