Comtrol ES7110-VB - Manual (Page 5)

Introduction RocketLinx ES7110 and ES7110-VB User Guide: 2000552 Rev. C - 5
Introduction
Product Overview
The RocketLinx ES7110 and ES7110-VBare IEEE 802.3af compliant PoE
switches designed for connecting a wide range of industrial PoE equipment such
as IP surveillance cameras, wireless access points, VoIP phone sets, point-of-sale
systems, and other devices where a power source is not conveniently located.
The RocketLinx ES7110 and ES7110-VB are equipped with eight 10/100BASE-
TX PoE injector switch ports, with each port delivering power up to 15.4W, and
two 10/100/1000BASE-TX (Gigabit) Ethernet uplink ports for transferring data to
the network. The ES7110 and ES7110-VB support QoS, which ensures high-
quality video traffic transmission by adjusting the data transfer priority.
The RocketLinx ES7110 and RocketLinx ES7110-VB are referred to as ES7110
in the remainder of this Guide unless there is model-specific information.
The ES7110 features convenient wiring with a standard 4-pin industrial terminal
block for power input and a fault relay alarm contact output. Additionally, each
Ethernet port has a Port Link Alarm, which can be configured to automatically
trigger on connection issues, warning administrators of abnormal operating
conditions and ensuring quick resolution to network issues.
In addition to advanced PoE and networking capabilities, the ES7110 is designed
for industrial applications and deployment in harsh conditions with an IP30 rigid
aluminum housing and extended operating temperature range (-25° to 70°C) that
ensure consistent operation in places such as mass transit vehicles, factories, and
outdoor settings.
Refer to the Comtrol web site for detailed ES7110 or ES7110-VB specifications.
Features
The RocketLinx ES7110 has the following features:
• Ten Ports
-
Eight 10/100BASE-TX PoE injector ports
- Two Gigabit (10/100/1000BASE-TX) uplink ports supporting high bandwidth applications such as IP surveillance
• IEEE 802.3af compliant PoE with a total output power budget of 65W (15.4W maximum on each port)
• The ES7110 uses 48VDC and the ES7110-VB 12-24VDC power input. Both models deliver IEEE 802.3af PoE on all
eight PoE ports
• QoS support for optimizing video and VoIP stream
• Extended operating temperature range for installation in wide variety of environments (-25
o
to +70
o
C)
• Alarm relay for failure and event notification
• Industrial-grade aluminum IP30 housing
• DIN rail or wall-mount installation
Add ES7106-VB Photo