Casio PRIVIA PX330ES1A User Manual

Page 31

Advertising
background image

English

Music Presets

E-29

8.

Enter a name for the preset.

Use the



(u) and



(i) buttons to move the cursor

to the character you want to change and then use the



(w, q)

buttons to change the character. The

following shows a table of available characters.

To input a space, press both of the



(w and q)

buttons at the same time.

9.

Press the



(ENTER) button.

This saves the data.

If the preset number where you are saving the data
already has data saved to it, a message (Replace?) will
appear on the display to confirm whether you want
to replace the existing data with the new data.

To edit the chord progression

1.

On the editing operation selection screen
(page E-28), select “CHORD” and then press
the



(ENTER) button to display the chord

progression editing screen shown below.

(1) Step (timing and chord)

The timing of a chord progression is expressed as a
series of three values separated by colons (such as
001:1:00) indicating measure

*1

(001), beat (1), and

tick (00).

*2

This series of three values is referred to

collectively as a “step”.
The screen shot above shows the first two steps
(001, 002) of the Music Preset. Use the

(REW) and

(FF) buttons to scroll and view other steps.

*1 Up to 999 measures
*2 There are 12 ticks per beat, as shown below.

(2) Cursor

Specifies the step that is currently selected for
editing.

(3) Resolution

Resolution is a unit used when editing step timing.
The initial resolution is R1 (one measure), but you
also can select R4 (1 beat = 4 quarter notes) when
you want to specify chords for each beat. Use the
instrument part buttons (



through



) to select

one of the eight resolutions shown below.

(3) Resolution

(2) Cursor

(1) Step (timing and chord)

01 02

09 10 11

00

Chord progression

Measure 1

Beat 1

Beat 2

Beat 3

Beat 4

Beat 1

Beat 2

Tick

001:1:00

002:1:00
For the sample display
above, the chord change
from C to Bm occurs here.

Measure 2

3

3

R1

R2

R4

R8

R8T

R16

R16T

R32T

ck

cl

cm

cn

co

cp

cq

cr

(1 measure)

(2 beats)

(1 beat)

(1/2 beat)

(1/3 beat)

(1/4 beat)

(1/6 beat)

(1/8 beat)

Advertising
This manual is related to the following products: