Deleting recorder data – Casio PRIVIA PX330ES1A User Manual

Page 39

Advertising
background image

English

Recording Your Keyboard Play

E-37

You can use the procedures below to delete an entire
recorder song or to delete a specific track of a recorder
song.

Deleting a Recorder Song

1.

Use the

(RECORDER) button to cycle

through the recorder modes until the
RECORDER lamp is lit (playback mode).

2.

While holding down the



(FUNCTION)

button, press the

(RECORDER) button.

This displays the recorder song selection screen.

3.

Use the



(w, q) buttons to select the

recorder song you want to delete.

4.

Hold down the

(RECORDER) button until

the message “Sure?” appears on the display.

5.

Press the



(YES) button to delete the

recorder song.

To cancel the delete operation, press the



(NO)

button.

Deleting a Recorder Song Track

1.

Perform steps 1 through 3 of the procedure
under “Deleting a Recorder Song” to select
the recorder song that contains the track you
want to delete.

2.

Press the



(i) button.

This displays the track selection screen.

3.

Use the



(w, q) buttons to select the

track you want to delete.

4.

Hold down the

(RECORDER) button until

the message “Sure?” appears on the display.

5.

Press the



(YES) button to delete the track.

To cancel the delete operation, press the



(NO)

button.

You can use punch-in recording to re-record a specific
part of recorder song that you want to improve or
correct.

1.

Turn on the recorder, enter the record mode,
and select the track that contains the section
you want to re-record.

See step 3 under “Recording to a Specific Track
(Part)” (page E-35).

2.

Hold down the

(RECORDER) button until

the punch-in recording screen appears on the
display.

3.

Press the

(START/STOP) button.

This will start playback of the selected track.

4.

When playback reaches the point you want to
re-record, play the notes and perform the
other operations you want.

This automatically starts punch-in recording, which
will continue until step 5, below.

Any one of the following also will start punch-in
recording: a pedal or pitch bend wheel operation;
pressing the

(RECORDER) button;

*1

changing the

tone setting; changing the rhythm, or tempo setting

*2

You can perform

(REW),

(FF), and

(PAUSE)

button operations during punch-in playback to jump
more quickly to the section you want to re-record.

Deleting Recorder Data

Lit: Playback mode

Re-recording Part of a
Recorder Song
(Punch-in Recording)

*1 Press

(RECORDER) when you want to start

punch-in recording without note input or a setting
change.

*2

System track only

Mistake

Playback

Use punch-in

recording to re-record

only this part.

Advertising
This manual is related to the following products: