Error messages – Casio PRIVIA PX330ES1A User Manual

Page 52

Advertising
background image

E-50

Using a Memory Card

One of the error messages below appears on the display when a problem occurs.

All mentions of “memory card” in the following table refer to an SD memory card.

Error Messages

Display

Message

Cause

Required Action

Convert

There is not enough Digital Piano memory available to
convert a recorder song (page E-34) to SMF data and store
it on the memory card.

Reduce the size of the recorder song data by deleting unneeded
tracks (page E-37), if there are any.

Format

1. The current memory card format is not compatible

with this Digital Piano.

1. Format the memory card on the Digital Piano (page E-45).

2. The memory card capacity is greater than 2GB.

2. Use a memory card with a capacity of 2GB or less.

3. There is something wrong with the memory card.

3. Use a different memory card.

MediaFull

1. There is not enough room available on the memory

card.

1. Delete some of the files on the memory card to make room for

new data (page E-47), or use a different card.

2. There is not enough room available in Digital Piano

memory.

2. Delete some or all user data from Digital Piano memory to make

room for new data.

Media R/W

1. Memory card data is corrupted.

1. Use a different memory card.

2. Digital Piano memory is corrupted.

2. Back-up Digital Piano memory data by copying it to your

computer, and then turn the Digital Piano off and then back on
again.
• Note that you may not be able to back-up Digital Piano data

in certain cases.

No Card

1. The memory card is not loaded correctly in the Digital

Piano’s memory card slot.

1. Correctly load the memory card into the memory card slot.

2. The memory card was removed while some operation

was in progress.

2. Do not remove the memory card while any operation is in

progress.

No Data

You tried to save a Digital Piano user area (user rhythm,
user rhythm song, etc.) that does not contain any data to
the memory card.

Select a user area that contains data.

No File

1. There is no MUSICDAT folder (page E-46) on the

memory card.

1. Create a MUSICDAT folder on the memory card or format the

memory card on the Digital Piano (page E-45).

2. There is no loadable or playable data in the

MUSICDAT folder, or there is no playable data in a
song playback folder (MUSIC__B, etc.)

2. Move the file you want to load or play into the memory card’s

MUSICDAT folder. For song playback, you can place the song
data into any one of the following folders: MUSIC__B,
MUSIC__C, or MUSIC__D.

Not SMF01

You are attempting to play back SMF Format 2 song data. This Digital Piano supports playback of SMF Format 0 or Format 1

only.

Protect

The memory card is write-protected.

Use the memory card’s write protect switch to enable writing.

ReadOnly

A read-only file with the same name you are trying to use
is already stored on the memory card.

• Use a different name to save the new file.
• Remove the read-only attribute from the existing file and

overwrite it with the new file.

• Use a different memory card.

SizeOver

1. The data on the memory card is too big to play.

1. This Digital Piano supports playback of song data files with a

maximum size of about 320 kbytes.

2. The data you are trying to load is too large.

2. The following is the maximum data size (per data item) when

loading data into Digital Piano memory.
User rhythm: Approximately 40KB
User Song: 320KB
User Music Preset: Approximately 8KB

WrongDat

1. The memory card data is corrupted.

2. The memory card contains data that is not supported

by this Digital Piano.

Advertising
This manual is related to the following products: