Crown Verity SW Series - Manual (Page 16)

SW Series Manual
16 17
3.0 Maintenance
1 Clean reflector surface with a damp cloth.
2 Ensure heater is secure on all hanging points.
3 Maintain clearance to combustibles at all times. Immediately remove objects in violations of the
published clearance to combustibles.
4 Check electrical wires and connections for wear or any kind of damage.
It is recommended that the following become a standard yearly procedure to obtain maximum operating
efficiency and trouble free operation.
During long periods of non-usage, remove or cover heater with a polyethylene bag and disconnect from
power supply. If further service to the heater is desired, contact your representative or the factory.
3.0 Maintenance • Maintenance Checks & Log