Crown Verity PF-2 User Manual
Page 15
15
TROUBLESHOOTING
For Service and Repairs in the US and Canada
Contact Crown Verity Inc. at 1-888 505 7240
Troubleshooting Chart:
Problem:
Probable Cause:
No Heat:
Gas valve not set to ON.
Thermostat dial not turned on.
Pilot not lit.
Gas supply not turned on, or connected.
Wire connections loose
Wire connections need cleaning
Thermopile
Insufficient or too much heat:
Thermostat dial not set to desired temperature.
High limit tripped (call service)
Temperature probe (call service)
Tank will not drain:
Shortening too cold.
Drain pipe clogged with debris.
NOTE: Hoses must be rated min. 140° F. Do not replace hoses, regulators, valves or burners with
other than original equipment. Do not attempt to replace or adjust burners. Contact qualified personnel
CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8
TEL: (519) 751-1800
FAX: (519) 751-1802
www.crownverity.com
Email: [email protected]