Crown Verity RT-72 User Manual

Page 5

Advertising
background image

4

Open spit barbecuing creates a delightful visual effect at outdoor parties. Use a meat
thermometer to monitor the temperature, remember to baste often & enjoy!

Helpful Hints:

• Use a little cooking oil on the bearings to ensure long bearing life.

• Firmly tighten the meat fork set screws

• Check the unit’s operation and temperature often

• Do not allow the motor to be exposed to rain or other wet conditions.

• Be wary of the pointed end of the rod sticking out at the opposite end of the motor.

Try to position the MCB with the point out of harm’s way.

• Don’t attempt to make any adjustments to the meat forks or to the coupling/pin

assembly while the rotisserie is turning.

• Keep hands away from moving parts and don’t leave the MCB unattended while in

operation.

• Always use a grounding 3 prong extension cord to connect the RT motor.

• Keep meat forks tight to the meat as it cooks. You may have to adjust them during the

cooking process.

• Always fill the water pan(s) with water.

• Keep the set screw(s) on the motor coupling tight.

The RT is capable of turning any amount of meat you can put on it. They have been
tested with weights up to 140 lbs. Which in our opinion is more meat weight than can
be physically loaded on the RT. However we cannot guarantee the motor life if loaded in
excess of 140 lbs. Finally, the RT is a powerful piece of equipment that can be potentially
dangerous if not used with caution. Think safety, and enjoy!

CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8

TEL: (519) 751-1800

FAX: (519) 751-1802

www.crownverity.com

Email: [email protected]

Advertising
This manual is related to the following products: