DVIGear DVI-7330 - Manual (Page 7)

-5-
5. SYSTEM CONNECTIONS
Typical System Diagram
DVI-D Port
DVI-7330-RX
Receiver
AC Adapter or USB Port
DVI-D Port
DVI-7330-TX
Transmitter
AC Adapter or USB Port
Single Fiber Optical Cable
DVI Interconnections
1. Connect the fiber optic cable to the optical ports on the Transmitter
and Receiver units.
2. Connect the Transmitter unit to the source (e.g., PC, Blu-Ray,
receiver/switcher output).
3. Connect the Receiver unit to the display (or receiver input, switcher
input).
4. Connect the supplied AC Power Adapters (or working USB port) to
the power input jacks on the Transmitter and Receiver units and then
to an AC power source.
5. Turn ON the Display, and then turn ON switchers and other distribution
equipment (if it exists). Finally, turn ON the source. Test the system to
ensure proper performance.