Compex Technologies NP25G 6C - Manual (Page 26)

Page 21
Configure Wireless Setup
The router supports wireless
LAN connectivity that is fully
compliant with the IEEE
802.11g and IEEE 802.11b
standards.
ESSID : Enter a preferred name for the wireless network.
Your wireless clients must be configured with the
same ESSID (or sometimes simply referred to as
SSID).
Wireless Profile
: Select from the list of wireless modes available:
a. 802.11b only
This mode supports wireless B clients with data
rates of up to 11Mbps in the frequency range of
2.4Hz.
b. 802.11g only
This mode supports wireless G clients with data
rates of up to 54Mbps in the frequency range of
2.4Hz.
c. 802.11b/g mixed
This mode supports both wireless B and G clients.
The basic rates are 1Mbps, 2 Mbps, 5.5 Mbps,
11Mbps, 6 Mbps, 12 Mbps and 24 Mbps.
Country : This is where you are located during the
connection.
Channel : This option allows you to select a frequency
channel for the wireless communication.
Tx Rate : This option allows you to select a specific transmit
power for the wireless communication. The
Transmit Power controls the signal strength
transmitted by the antenna. If the antenna has a
weak RF coverage, increase the Transmit Power. If
the antenna has a strong RF coverage, decrease
the Transmit Power.