Compex Technologies NP25G 6C - Manual (Page 71)

Page 66
Configure Bandwidth Control for LAN
Bandwidth Control allows you to decide the available bandwidth in
levels of 1kbit.
Follow these steps to setup Bandwidth Control for LAN.
Click
Bandwidth Control from the
CONFIGURATION menu.
Select whether to Enable or
Disable Bandwidth Control and
click Apply.
Click Add to add a Bandwidth
Control Entry
1. Enter the Bandwidth Control Rule Name.
2. Enter the Committed Rate in kbit. This
sets the bandwidth committed.
3. Enter the Ceil Rate in kbit. This is the
ceiling rate which sets the maximum
bandwidth allowed.
4. Enter the Rule Type
Rule Types:
• Download by IP Address
• Download by MAC Address
• Upload by IP Address
• Upload by MAC Address
5. Enter the IP or MAC Address according
to the Rule Type selected.
6. Click Add to add this Bandwidth Control
Entry or click Cancel to cancel to
disregard your entry.
1
2
3
4