CatEye Q3A - Manual (Page 32)

MODE2
ENG-31
Sports mode
Continue
Press the * MODE2 button with the real time lap data to return to the previous
Sports mode screen.
Lap time and split time
The lap time displays elapsed time from the last
press of the LAP button. The split time displays
the elapsed time from the start of measurement to
the point LAP button is pressed.
The measured lap data is saved to a file when *
you perform a reset operation (page 27).
Pressing the
* LAP button while the total number of
laps reaches 99 points displays the lap data, but
“--” appears in place of the lap number indicating further recording is impossible.
The lap data can be reviewed in the Data mode “File view”(page 40).
*
Real time lap data
Pressing and holding the LAP button on any screen in Sports mode displays the
real time lap data in the upper and middle displays. For the real time lap data, the
unit starts/stops the measurement in sync with the primary measurement; how-
ever, it resets and restarts the data every time you press the LAP button. This in-
dependent feature of lap time can be useful also for pace checks in a lap and sec-
tional trials such as hill climb section.
TM
Start of
measurement
Lap time 1
Split time 1
Split time 2
Lap time 2
LAP LAP
Previous screen
Real time lap data
Average lap speed Maximum
lap speed
Average lap heart rate
(press &
hold)
Maximum lap heart rate
Lap timer *
Average lap
cadence
Lap distance
Maximum
lap cadence
Any screen in
Sports mode
LAP
MODE1 MODE1