CatEye Q3A - Manual (Page 61)

ENG-60
Setup mode
Correcting the sea level altitude ALT
Correct the sea level altitude.
Stop the measurement before you change the settings. *
In case of shortcutting from Clock mode or Sports mode, proceed to the step 2 *
skipping the step 1.
For details of the altitude, see “Basic knowledge of the altitude measurement” on page 61. *
Press and hold the * MODE1 or MODE2 button to increase/decrease the number
quickly.
1. Press and hold the MENU button in the Clock mode or Sports
mode until “SETUP MENU” appears on the screen.
It switches to “CLOCK DATE” automatically.
Switch modes :
MENU
(press & hold)
2. Switch to “ALT” using the MODE1 or MODE2 button, and then
confirm it using the SSS button.
Switch screen :
MODE2
MODE1
(or) Confirm :
SSS
3. Select “REF (correcting the sea level altitude)” or “HOME
(home altitude)” with the MODE1 and MODE2 buttons, and
then confirm it with the SSS buttons.
There are 2 ways to correct the sea level altitude with this unit. One *
is REF (correcting the sea level altitude), and HOME (home altitude),
the other. For details, “Sea level altitude correction” on page 61.
4. Select “+” or “-“ of the sea level altitude. Then, change each
digit one by one for the value using the MODE1 and MODE2
buttons, and move digits using the SSS button.
Increase/decrease:
MODE2
MODE1
(or) Move digits:
SSS
The altitude is entered in 4 digits in the unit of meter, 5 *
digits in the unit of feet, both in integer numbers.
Pressing and holding the * MODE1 button for 3 seconds confirm the
changes, and shortcuts to the previous Clock mode or Sports mode.
Pressing the 5. MENU button confirms the change, and returns
to the Setup mode “ALT”.
Press the MENU button repeatedly to switch to another mode.
To the mode top/switch the mode :
MENU
Current sea level
altitude
Shortcut from the Clock mode or Sports mode