CatEye Q3A - Manual (Page 50)

MODE1
MODE2
ENG-49
Setup mode
Continue
Setup mode (SETUP)
Switching to Setup mode
Press and hold the MENU button in the Clock mode or Sports
mode until “SETUP MENU” appears on the screen, then the
wristwatch switches to the Setup mode automatically.
Function in Setup mode
Setup mode is used to change various settings of the wristwatch. Switch the setup
items pressing the MODE1 or MODE2 button.
Once any setting is changed, confirm it pressing the * MENU button.
Unless you perform an operation within 3 minutes, it returns to Clock mode. In such cases, *
any change is not reflected.
Shortcut from Clock mode or Sports mode does not display the altitude adjusting screen *
as shown in the figure below. It directly switches to the setting entry screen.
Setting the
clock/date
Correcting the sea
level altitude
(page 50)
(page 60)
Setting the
alarm clock
Setting sound
(page 51)
(page 59)
Setting the tire
circumference
Setting the
auto-mode
(page 52)
(page 58)
Searching for
sensor ID
Total trip distance/total
elapsed time entry
(page 53)
(page 57)
Setting the
measurement unit
Setting the
record interval
(page 55)
(page 56)
MENU
(press & hold)