Canon DR-6010C - Manual (Page 16)

12 Before Using the Scanner
1-3 Names and Functions of Parts
This section describes the name and function of each part. Make sure to
read this section and familiarize yourself with the parts of the scanner
before using the scanner.
■ Front View (Feed Tray Open)
■ Controls
Document Feed
Tray Extension
Pull this tray out if the
document hangs over
the edge of the main
tray.
(See p. 19.)
Document Feed Tray
Place the document to be
scanned here. (See p. 19.)
Document Eject Tray Extension
Open if the document extends beyond the edge of the
eject tray. (See p. 20.)
Document
Eject Tray
Scanned
documents are
ejected here.
(See p. 20.)
Document Guides
Adjust these guides to fit the width of the
document.(See p. 23.)
Feed Selection Lever
Use this lever to change the way documents are fed.
Push it down (
) to feed documents continuously
(page separation mode.) (See p. 22.)
Push it up (
) to feed documents one at a time or
to feed documents that are fastened together, such
as invoices, without separating them (bypass mode.)
(See p. 25.)
Power Indicator
This indicator lights when the scanner is turned ON.
Power Switch
This switch is used to turn the scanner ON.
Job Buttons
These buttons can perform user-specified functions
assigned with the Job Registration Tool. (See p. 28.)