Emerson Radio PD6871 - Manual (Page 14)

14
Press the POWER button ❶ to
turn the unit on. Set the VOLUME
control ❷ to a low setting.
1
2
1
Insert a pre-recorded cassette into
the slots in the Cassette Door with
the open end facing up and the full
reel on the right side. Close the
cassette door.
Full Reel on Right
Open Surface Side
4
Press the STOP/EJECT ( )
button to open the Cassette Door.
3
Press the FUNCTION button until
“TAPE” appears in the display.
2
To pause playback momentarily,
press the cassette PAUSE ( )
button. The tape movement stops
but the tape motor is still running.
Press the cassette PAUSE ( )
button again to release pause and
resume normal playback.
7
When the tape reaches the end,
the auto-stop mechanism activates,
the tape PLAY (➛) button is
released and the tape motor shuts
off. Press the STOP/EJECT (
)
button to open the Cassette Door
and remove the tape.
9
To stop playback before the tape
ends, press the STOP/EJECT
(
) button. The PLAY (➛)
button is released and the tape
motor shuts off.
8
Press the cassette PLAY (➛)
button ❶ to begin playback. Adjust
the BASS BOOST button ❷ and
VOLUME control ❸ as desired.
1
3
2
5
To advance or rewind the tape
rapidly, press either the cassette
FAST FORWARD (➛➛) ❶ or
REWIND (❿❿) ❷ button. When
you reach the desired point, press
the cassette PLAY (➛) button ❸
to resume normal playback.
3
2
1
6
PLAYING CASSETTE TAPES
PLAYBACK
OPERATING INSTRUCTIONS (CONTINUED)
PD6871.O/M.QXD 4/23/02 10:15 AM Page 14