Emerson Radio PD6871 - Manual (Page 16)

16
With the power off, press and
hold the TIMER SLEEP button ❶
until “ ” and the Timer blinks in
the display. Immediately release
the TIMER/SLEEP button ❶ and
press and hold the MEMORY/
CLOCK SET button ❷ until timer
hour digits blink in the display.
2
1
1
Within a couple seconds, will
light in the display to indicate that
the timer is set. When the actual
time matches the time set for the
Timer, the unit will turn on to the last
function (CD, tape or radio) used.
TO TURN THE TIMER OFF SO
IT IS NOT SET FOR THE NEXT
DAY, press and hold the
TIMER/SLEEP button until
disappears from the display.
3
Press the Skip/Search ( ) ❶ or
( ) ❷ button to set the hour,
then press the MEMORY/CLOCK
SET button ❸ again; the minute
digits will blink. Press the
Skip/Search (
) ❶ or ( ) ❷
button to set the minutes, then
press the MEMORY/CLOCK SET
button ❸ again.
3
1 2
2
SETTING THE TIMER
Set the timer to turn the unit on at a preset time as follows :
Press the POWER button to turn
the unit on and tune the desired
radio station or insert a CD as
previously instructed.
1
Press the TIMER/SLEEP button a
second time to set the unit to turn
off after 80 minutes. Each
additional press with decrease the
sleep time by 10 minutes. After the
sleep time is set, you can press the
TIMER/SLEEP button at any time
to stop the Sleep function; “SLEEP”
will disappear from the display.
3
Press the TIMER/SLEEP button
and “90” will appear and “SLEEP”
will blink in the display.
2
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
In the Off mode, press the DISPLAY button to cycle from the
clock to the timer.
In the On mode, press the DISPLAY button to cycle from the
selected function to the clock and to the timer.
1
DISPLAY BUTTON
OPERATING INSTRUCTIONS (CONTINUED)
PD6871.O/M.QXD 4/23/02 10:15 AM Page 16