Emerson Radio ES25 - Manual (Page 15)

14
SETTING THE CLOCK
When the system is connected to the AC outlet for
the first time and “AM 12:00” appears on the display.
This is your indication that the time display is
incorrect and needs to be reset.
1.) Press the STANDBY/ON button on the front
panel or remote control to turn the system ‘On’.
The Tuner display comes on, the display will
show “FM 87.5 MHz”.
2.) Press the AUX button on the front panel to
select the Aux function. The time display will
show current time and the colon will be flashing.
3.) Press the button on the front panel or CLOCK SET button remote control
for at least 3 seconds. “12H” will begin
flashing in the display indicating that the clock
is set for 12-hour “American” time.
Note: You may press either the /
button on the front panel of the main unit or
> / < buttons on the remote control once to
change the clock format to 24 Hour for
“European” time as desired. The display will
change from “12H” to “24H”.
4.) Press the CLOCK SET or button again.
The Hour digits will begin flashing.
ES25_072904.p65 30/7/2004, 11:34 14