Emerson Radio ES25 - Manual (Page 24)

23
5.) Close the CD door. The disc will spin and “00” will flash in the track number.
Within a few seconds the disc will stop spinning and the display will show the
total playing time and total tracks on the disc.
Note: If the disc is inserted upside down or
if the disc is badly scratched and unreadable,
playback will not be possible. In this case
the main display will show “no dISC”.
Remove the disc and re insert it properly, or
try another disc.
6.) Press the PLAY/PAUSE button on the front
panel of the main unit or on the remote control
to begin playback on track 1. The display will
show the elapsed playing time of each track
as it plays.
7.) Adjust the VOLUME +/– buttons and VARIABLE BASS CONTROL level as
desired.
8.) When the last track has played the player stops
automatically and the display again shows the
total playing time and tracks on the disc. You
may also stop playback at any time by pressing
the STOP/BAND button on the front panel
of the main unit or on the remote control.
9.) When you are finished listening, press on the front edge of the CD door to
open it. Remove your disc and close the CD door.
10.)Press the STANDBY/ON button to return the system to the Standby (Power
Off) mode.
ES25_072904.p65 30/7/2004, 11:34 23