Emerson Radio ES25 - Manual (Page 22)

21
5.) Press the PROGRAM button again to enter the station in the selected preset
memory number.
6.) Repeat steps 4 and 5 until you have memorized up to 10 stations on the FM
band, then press the STOP/BAND button to switch to the AM band and
follow the same procedure to enter up to 10 stations on the AM band.
RECALLING PRESET STATIONS
Turn the system ‘On’ and select the desired band.
Press the REPEAT/PRESET button on the remote
control unit only repeatedly to scroll through the
preset memories until the display shows the desired
station.
There is no REPEAT/PRESET button on the main unit.
CHANGING PRESET STATIONS
To change any preset station memory, select the desired band and tune to the
new station you wish to memorize.
Press the PROGRAM button on the remote control unit and then press the REPEAT/
PRESET button to display the memory number you wish to change.
Press the PROGRAM button again to enter the new station in the memory. The
new station is memorized and the previous station is deleted from the memory.
ES25_072904.p65 30/7/2004, 11:34 21