Emerson Radio MS9923TT - Manual (Page 25)

24
Cassette Playback
1.) Press the STANDBY (POWER) button to turn the system ‘On’.
2.) Press the TAPE button to select the ‘Tape’
function. The TAPE indicator appears in the
display.
3.) Press the STOP/EJECT key on either Deck A or Deck B to open the cassette
door.
4.) Insert the pre-recorded cassette(s) into the slots on the door with the exposed
tape facing down and the full reel on the left.
5.) Close the cassette door. Press the PLAY key to begin playback of your tape.
6.) Adjust the VOLUME and BASS BOOST or EQ controls as desired.
7.) Press the STOP/EJECT key to stop playback at any time. When the tape ends
the Automatic Stop System will release the PLAY key and shut off the tape
motor.
8.) Press the STOP/EJECT key again to open the cassette door and remove your
tape.
MS9923TT_B022806.p65 28/2/2006, 9:44 24