Emerson Radio MS9923TT - Manual (Page 28)

27
Stereo Phonograph Operation
1.) Raise the turntable dust cover.
2.) Release the tone arm clamp, and remove the stylus protector.
3.) Press the AUX/PHONO button to select the
Phono mode. AUX/PHONO indicator appears in
the display
4.) Place a record on the turntable, over the center spindle.
5.) Place the 45 rpm adapter over the center spindle when playing 45 rpm records.
Set the Speed Selector Switch to 33, 45 or 78 rpm according to the record you
are playing.
6.) Raise the Cue Lever to lift the tone arm off the tone arm rest and move the
tone arm to the beginning of the record or to any desired track. This will cause
the turntable to start automatically.
7.) Gently lower the tone arm by the Cue Control Lever onto the record to start
playing. Adjust the VOLUME, BASS BOOST, and EQ setting as desired.
8.) The Turntable will stop automatically when the record finishes. To stop the
record before it ends, lift and replace the tone arm carefully onto the tone arm
rest.
Note: Do not turn or stop the turntable manually. Moving or jarring the Turntable
without securing the Tonearm clamp could result in damage to the Tonearm.
A U X I L I A R Y I N P U T C O N N E C T I O N
Sound from other Audio or Video equipment can be reproduced by connecting the
audio output of the equipment to the AUX IN jacks of this audio system.
Connect the left/right Auxiliary output, Line output, or Record output jacks of the
external equipment to the LEFT/RIGHT AUX IN jacks on the back panel of this
system.
Press the AUX/PHONO button of the audio system to select Auxiliary input sound.
Note: The “AUX” input signal will automatically mute when the Record Player
(Turntable) is operating.
MS9923TT_B022806.p65 28/2/2006, 9:44 27