Emerson Radio SM51TR - Manual (Page 17)

16
1. Press POWER button to switch on the system.
Press TUNER / BAND button to select TUNER
function.
2. Press the TUNER / BAND button repeatedly to
select FM or AM band.
3. For manual tuning, quickly press and release the
TUNING DOWN / PREVIOUS or TUNING UP /
NEXT button to select the desired radio station.
4. For auto tuning, press and hold the TUNING
DOWN / PREVIOUS or TUNING UP / NEXT button
for 1 second. The system will search until a strong
radio station is found. If the station is not the desired
one, press and hold the TUNING DOWN /
PREVIOUS or TUNING UP / NEXT button again
to search for the next station. Weak stations are
skipped during automatic tuning.
NOTE:
When tuning, the sound will be muted to eliminate
interfering background noises. When a station is found,
the audio signal will come back on. “STEREO”
indicator appears on the display when an FM stereo
signal is received. With weak FM stereo signals, you
may hear static or background noise. These noises
can be suppressed by switching to Mono mode by
pressing the ST./NOR. button to MONO /H.S.D.
position. “STEREO” indicator will disappear from
the display.
PRESET STATIONS INTO MEMORY
Storing Preset Stations.
You can store stations in the TUNER ′s memory.
(20 FM and 20 AM).
1. Press TUNER / BAND button to select TUNER
function and FM or AM band.
2. Press the TUNING DOWN / PREVIOUS or
TUNING UP / NEXT button to select the radio
station you wish to store.
3. Press MEMO / C-ADJ button, the “MEMORY”
indicator will flash, then press REPEAT / MEMO-
UP or STOP / MEMO-DOWN or 0-9/+10 button on
remote control to select the desired location
number to store.
4. Press MEMO / C-ADJ button again to store the
station into the designated location.
5. To preset additional stations, follow steps 2 to 4 up
to 20 presets for each FM and AM band.
Recalling Preset Stations.
1. Select the TUNER function and FM or AM band
with the TUNER / BAND button.
2. Press the REPEAT / MEMO-UP or STOP / MEMO
- DOWN button until the desired preset memory
number appears. Or press the 0-9/+10 digit buttons
on the remote control to select the preset stations
directly.
AUTO ( automatic ) / MANUAL TUNING
LISTENING TO TUNER
SM51TR.p65 2001/7/3, PM 02:24 16