Emerson Radio SM51TR - Manual (Page 18)

17
CONTROLS AND FEATURES
1. 45 rpm Adapter.
2. Turntable platter.
3. Cueing lever.
4. Speed (33 rpm / 45 rpm) selector.
5. Tone arm.
6. Tone arm rest.
PLAYING PHONO RECORDS:
1. Press POWER button to turn the system ‘On’.
2. Remove the stylus (needle) cover.
3. Unlock the tone arm using the tone arm lock.
4. Press PHONO / AUX button to select PHONO
function. AUX indicator appears on display.
5. Set the speed selector to either 33 rpm or 45 rpm
according to the record to be played. Place the 45
rpm adapter on center of spindle to play 45 rpm
records.
6. Place a record on the turntable. Use the cueing
lever to raise the tone arm. Move the tone arm
outwards, away from the turntable platter. The
turntable platter will start to rotate.
7. Move the tone arm over the record and release
gently. The stylus will lower onto the record and
start to play.
8. Adjust the VOLUME control to obtain desired
listening level.
3
2
4
5
6
1
TURNTABLE (PHONO Input)
9. Adjust the EQ control to suit your listening pleasure.
10. During play you may move the tone arm towards
the center of the turntable platter, to switch the
turntable ‘Off’. Be sure the tone arm is replaced
and locked correctly using the tone arm lock. This
will avoid damage to the stylus when the turntable
is not in use.
11. When the record has finished playing, the turntable
platter will switch off automatically. Secure tone arm
using the tone arm lock.
NOTE:
• When Turntable is playing, AUX IN signal will be
muted.
• In order to listen to AUX IN sound, the Turntable
must be switched ‘Off’.
SM51TR.p65 2001/7/3, PM 02:24 17