Changing the lithium battery – Emerson Radio CKS2237 User Manual

Page 16

Advertising
background image

1 5

CHANGING THE LITHIUM BATTERY

Like all batteries, eventually the built in lithium battery will need to be replaced. A

number of factors, such as, the length of time between the date the radio was

manufactured and the date you plugged it in for the first time determine the amount

of time before replacement. During this initial storage period, the lithium battery is

supplying power to the SmartSet

®

computer memory. Once you plug the radio in,

your household outlet supplies the power, and the battery is not being used. A

fresh lithium battery can supply power to the SmartSet

®

computer for at least 3

years even if it is never connected to an AC power supply. If your radio was

connected to your AC supply within a few months after it was manufactured, and

you experience only the normal, nuisance type, short duration power interruptions,

your battery may last for up to 5 years or even longer.

When the battery power drops below a certain level, the “BATT. LOW” indicator

will ‘flash’. When you see this indicator, you should change the battery as soon as

it is convenient for you to do so. To change the battery proceed as follows:

1.) Purchase a replacement 3V lithium battery wherever batteries are sold. The

battery type is CR2430 or equivalent.

2.) Remove the battery from its package so it is ready to install.

IMPORTANT: Leave the radio power cord connected to your AC outlet.

This will provide power to the SmartSet

®

computer memory while the

original lithium battery is removed.

3.) Place the radio face down and use a small screw driver to remove the screw

securing the battery holder to the cabinet.

BE CAREFUL NOT TO LOSE THIS SMALL SCREW !

CKS2237_073106.p65

31/7/2006, 11:11

15

Advertising