Emerson Radio CKS2237 - Manual (Page 8)

7
SETTING THE TIME, THE FIRST TIME
IMPORTANT: The first time you connect your new SmartSet ® clock radio to the
AC outlet the internal computer will automatically set the time correctly for the
Eastern Time Zone, which is the initial default setting.
The display will scan for a few seconds
and then set the correct “Month”, “Date”,
“Day” and “Time” in the Eastern zone.
If you live in the Eastern Time zone,
there’s nothing else to do. Your clock is
set correctly and running.
If you do not live in the Eastern Time zone you must change the default zone
display to your own zone. You only do this one time and the SmartSet ® will remember
the new default zone setting and will always return to that setting after a power
interruption.
There are 7 time zones programmed into your SmartSet ® clock radio as follows:
ZONE 01 — Atlantic Time
ZONE 02 — Eastern Time (Default Setting)
ZONE 03 — Central Time
ZONE 04 — Mountain Time
ZONE 05 — Pacific Time
ZONE 06 — Yukon Time
ZONE 07 — Hawaiian Time
To change the default time zone display, depress the TIME ZONE button.
The word “ZONE” appears in the main
display, and the number “2” will appear
on the month/date display, indicating
that the default zone is Zone 02, Eastern
Time.
OPERATING INSTRUCTIONS
CKS2237_073106.p65 31/7/2006, 11:11 7