Empress Effects Phaser - Manual (Page 19)

MIDI Control
The Empress Phaser allows all of its digital parameters to be
controlled via MIDI control change messages, and to have its tempo
changed with MIDI clock messages. To use MIDI with your phaser
you’ll have to:
1. Attach the Empress Midibox using a ¼” patch cable to the
control port. This is a simple device which converts the
signal on a standard MIDI cable to a ¼” cable you can plug
into your phasers control port. (Not included with the
phaser)
2. Configure the pedal for MIDI control by setting the internal
control port dip switches to the MIDI mode.
3. Configure the unit’s MIDI channel by setting the internal dip
switches labelled ‘MIDI CH’. Select a channel that won’t
conflict with the other devices in your MIDI rig.