E-MU PIPEline - Manual (Page 12)

Position your E-MU PIPEline™ units 9
Once your transmitter and receiver have been paired, they will be linked
automatically when turned on subsequently.
Step 5: Position your E-MU PIPEline™ units
Place the receiver up to 15 meters (approximately 49 feet) away from the
transmitter. You may place the units in different rooms but avoid placing
them near large metal surfaces and objects, or objects emitting radio
frequencies, for example, a radio, cordless phone or other Wi-Fi
®
access
points.
IMPORTANT DO NOT press the Connect button repeatedly on your transmitter
or receiver before a pairing process is complete or else the units
may not be paired properly.
NOTE • If your transmitter and receiver do not pair, simply reset them.
To reset the wireless connection, press and hold the receiver’s
Connect button for five seconds.
• For troubleshooting information, see “Troubleshooting Wireless
Features” on page 13.
NOTE • Signal quality between the transmitter and receiver may be
affected by any object or structure (for example, multiple walls)
that is between the units. Experiment with different positions if
necessary.
• Once the battery is charged, the units can be moved around and
need not be placed near a power outlet. This is the case if it is
connected to portable equipment like headphones or
notebooks. However, movement will be restricted if the
attached equipment (like an amplifier) requires a power outlet.
EMU Pipeline UG.fm Page 9 Wednesday, March 4, 2009 5:56 PM