E-MU Tracker Pre USB 2.0 - Manual (Page 13)

Insert Connection Example
TRACKERpre Reference Manual 13
INSERT CONNECTION EXAMPLE
Tip Ring
TRS Plug
POWER
BYPASS
ON
10
9
8
6 5 4
3
0
2
1
7
LINK
GAIN REDUCTION
COMPRESSOR
10
9
8
6 5 4
3
0
2
1
7
GAIN METER
MEDIUM
RELEASE
ATTACK
FAST SLOW
SLOW
RED.
FAST
OUTPUT
1 1 2 +3 3 5 7 0
VU 100 80 60 40
Input Output
Mic Preamp
Insert
Device
A/D Converter
USB
EXTERNAL PROCESSOR
Mic
Send
Return
To Effect From Effect
SEND/RETURN CABLE
BLOCK
DIAGRAM
Tip Ring
Tip Ring
The pre-amplified signal is sent Out the
Tip of the plug and Returns to the
Tracker Pre via the Ring of the plug.
Inserting a stereo send-return cable into an Insert jack breaks the
connection between the Mic Preamp and the A/D converter and allows
you to insert a serial processing device, such as a compressor or EQ.
(Compressor, EQ, etc.)
TIP . . .
Tracker Pre can be used as
a standalone, high-quality
stereo microphone preamp
if needed.
Preamp
Output
From
Preamp
Insert Jack
To tap off the Mic Preamps
without interrupting the
connection to the ADC,
insert a mono plug halfway
(to the first click) into the
insert jack.