E-MU Tracker Pre USB 2.0 User Manual
Page 28
Tutorials
28
E-MU Systems
Return to the Audio Setup Options
9. Once Sonar 6 LE has restarted, select Audio from the Options menu.
10. Click the ASIO Panel. The pop-up dialog box
shown at right appears.
11. Set the ASIO Buffer Latency as low as your
computer will allow. A low latency setting is
important to assure fast response when using
virtual instruments and to minimize delay when
monitoring through Sonar LE 6. If you hear
crackles or other audio problems, try slightly
increasing the Buffer Size.
12. Close the Audio Options screen by clicking OK.
Note: If the Sonar 6 LE application crashes for
any reason, it is recommended that you re-boot
the computer.
Set the Location of your Audio Files
TIP . . .
If you have two or more
hard disks, it’s better to
store audio files on a disk
that isn’t running your OS.
13. From the Options menu,
select Global.
14. Select the Audio Data tab as
shown at right.
15. Select a location for the
Global Audio Folder. This is
where your large audio files
will be kept.
16. Select 24 bits as the Recording
Bit Depth. The Tracker Pre is a
24-bit device so why not use
the best possible resolution?
17. Click OK to select your
choices and close Global
Options.
Step 15
Step 16