E-MU Tracker Pre USB 2.0 - Manual (Page 33)

Tutorials
TRACKERpre Reference Manual 33
10. Bring up the mini keyboard by clicking the icon on Proteus VX and play a
few notes. You should be hearing sound. If not, verify that the Tracker Pre is
properly configured.
• Note: If the sound volume is very low, you can decrease the Headroom of
Proteus VX. (Options, Preferences, Headroom/Boost) Keep in mind that
with less headroom, Proteus VX will be more prone to clipping when
multiple channels are played.
11. Play your MIDI controller and verify that it plays Proteus VX. If not, make
sure that your MIDI keyboard is set to the same MIDI channel number as
Proteus VX (probably channel 1). You can also change the MIDI channel of
Proteus VX using the channel Inc/Dec keys shown on the previous page.
Play a Few Presets.
12. To Audition Presets: first highlight the preset number (i.e. ), then scroll
through the presets using the up/down keys on your computer keyboard.
13. Try out the MIDI Controller knobs on your MIDI keyboard.
In order to work, the continuous controller numbers of your keyboard knobs
must match those on Proteus VX. (Refer to the manual that came with your MIDI
keyboard, or change the controller numbers on Proteus VX, located under Options,
Preferences, Controllers tab.)
14. Select the 16 channel tab. This page allows you to select presets for all 16 MIDI
channels.
NOTE
You can also select a single
preset for the track by
selecting the Program
Change number you want.
For some unknown reason,
Sonar 6 LE filters out
program change messages
from a MIDI track.
A Better Way: Assign up
to 16 presets in the Proteus
VX Multisetup and record a
MIDI track for each channel.
15. Select a preset for MIDI Channel 1 by clicking the little triangle.
16 Channel Tab Select Preset