Chicago Electric Belt Sander 90045 - Manual (Page 5)

Page 5 For technical questions, please call 1-800-444-3353. SKU 90045
disconnect the plug from the c.
power source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. if damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
keep cutting tools sharp and clean.
f.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
use the power tool, accessories
g.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
Service 5.
have your power tool serviced by a a.
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Belt Sander Safety warnings
hold power tools by insulated 1.
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring or its own
cord. Contact with a ″live″ wire will make
exposed metal parts of the tool ″live″ and
shock the operator.
Maintain labels and nameplates on
2.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to
3.
begin work before turning on the tool.
Do not lay the tool down until it has come
4.
to a complete stop. Moving parts can
grab the surface and pull the tool out of
your control.
When using a handheld power tool,
5.
maintain a firm grip on the tool with both
hands to resist starting torque.
Do not leave the tool unattended when
6.
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
This product is not a toy. Keep it out of
7.
reach of children.
People with pacemakers should
8.
consult their physician(s) before use.
Electromagnetic fields in close proximity
to heart pacemaker could cause
pacemaker interference or pacemaker
failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with Trigger locked on.
• Properly maintain and inspect to avoid
electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit