Crestron electronic DIN Rail Universal Dimmer DIN-1DIMU4 User Manual
Page 13
Crestron DIN-1DIMU4
DIN Rail Universal Dimmer
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
9
AUTO (1 – 4) LED
(4) Red LEDs, illuminate when
a corresponding channel is set
to auto-detect the load type
10
NON-DIM (1 – 4) LED
(4) Red LEDs, illuminate when
a corresponding channel is
operating in non-dim mode
11
Channel Mode Select
(1 – 4)
(4) Recessed miniature push
buttons, used to select each
channel’s operating mode
For more information, refer to
“Operation” which starts on
page 23.
12
LOADS (1 – 4)
(LEDs and Buttons)
(4) Red LEDs and (4) miniature
push buttons for status
indication and local control of
each channel
13 NET
(2) 4-pin 3.5 mm detachable
terminal blocks, paralleled
Cresnet slave port
Maximum wire size: 1.5 mm
2
(16 AWG)
24: Power (24 Volts DC)
Y: Data
Z: Data
G: Ground
(Continued on following page)
Operations & Installation Guide – DOC. 6668D
DIN Rail Universal Dimmer: DIN-1DIMU4
• 9