Crestron electronic DIN Rail Universal Dimmer DIN-1DIMU4 - Manual (Page 17)

Crestron DIN-1DIMU4 DIN Rail Universal Dimmer
The DIN-1DIMU4 is designed for installation on a DIN rail. Refer to the
following diagram when installing.
Installing the DIN-1DIMU4
Din Rail Release
Din Rail
(Not Supplied)
DIN-1DIMU4
Top
1. Use a flat object (e.g., a flat head screwdriver) to pull the DIN rail
release downward.
2. With the top of the unit tilted toward you, place the DIN-1DIMU4
against the bottom of the DIN rail.
NOTE: When mounting DIN rail products, it may be necessary to
use a flat-head screwdriver to pull the DIN rail release tab while
snapping the device onto the DIN rail.
3. Tilt the top of the DIN-1DIMU4 toward the DIN rail until it is
secure on the top edge of the rail. Push the DIN rail release upward
to lock the DIN-1DIMU4 into place.
To remove the DIN-1DIMU4 from the DIN rail, use a small, flat object
(e.g., a flat head screwdriver) to pull the DIN rail release downward to
unlock it and tilt the top of the DIN-1DIMU4 away from the DIN rail.
NOTE: Certain third party DIN cabinets provide space for an
informational label between each DIN rail row. Crestron Engraver
software (version 4.0 or later) can generate appropriate labels for all
Crestron DIN rail products.
Operations & Installation Guide – DOC. 6668D DIN Rail Universal Dimmer: DIN-1DIMU4
• 13