Crestron electronic DIN Rail Universal Dimmer DIN-1DIMU4 - Manual (Page 5)

Crestron DIN-1DIMU4 DIN Rail Universal Dimmer
DIN Rail Universal Dimmer:
DIN-1DIMU4
Introduction
The DIN-1DIMU4 is a four channel universal lighting control module
designed to support dimming of both forward and reverse phase type
loads. A single model supports both 120 and 220-240 Volt electronic and
magnetic low-voltage, incandescent, neon/cold cathode, 2-wire dimmable
fluorescent, and non-dimmable lighting loads up to 5 Amps per channel,
10 Amps total.
Features and Functions
• Four channels of forward or reverse phase dimming
• Auto load detection
• 120 to 240 Volt 50/60 Hz operation
• Selectable non-dim mode
• Extreme stability in noisy environments
• Short circuit and overload protection
• Master air-gap relay
• Override input
• Cresnet ®
communications
• Setup via front panel or software
• Programmable functionality via DIN-AP2
• 12M wide DIN rail mounting
Operations & Installation Guide – DOC. 6668D DIN Rail Universal Dimmer: DIN-1DIMU4
• 1